P112(c) PACKING INSTRUCTION
(Solid dry powder 1.1D)
P112(c)
The following packagings are authorized, provided the general provisions of 4.1.1, 4.1.3 and special packing provisions of 4.1.5 are met.
Inner packagings Intermediate packagings Outer packagings
Bags Bags Boxes
  • paper, multiwall, water-resistant
  • paper, multiwall, water-resistant with inner lining
  • steel (4A)
  • plastics
  • plastics
  • aluminium (4B)
  • woven plastics
  • other metal (4N)
Receptacles
  • natural wood, ordinary (4C1)
Receptacles
  • metal
  • natural wood, sift-proof (4C2)
  • fibreboard
  • plastics
  • plywood (4D)
  • metal
  • wood
  • reconstituted wood (4F)
  • plastics
  • fibreboard (4G)
  • wood
  • plastics, solid (4H2)
 
Drums
  • steel (1A1, 1A2)
  • aluminium (1B1, 1B2)
  • other metal (1N1, 1N2)
  • plywood (1D)
  • fibre (1G)
  • plastics (1H1, 1H2)

Additional provision:

  1. Inner packagings are not required if drums are used as the outer packaging.

  2. The packaging shall be sift-proof.

Special packing provisions:

PP26
For UN Nos. 0004, 0076, 0078, 0154, 0219 and 0394, packagings shall be lead-free.
PP46
For UN 0209, bags, sift-proof (5H2) are recommended for flake or prilled TNT in the dry state and a maximum net mass of 30 kg.
PP48
For UN 0504, metal packagings shall not be used. Packagings of other material with a small amount of metal, for example metal closures or other metal fittings such as those mentioned in 6.1.4, are not considered metal packagings.